What Is Faucet Repair & Installation
Faucet repair covers fixing a drip, restoring water pressure, or resolving a leak at the base of a kitchen or bathroom fixture, usually by replacing a worn cartridge, O-ring, or valve seat. Installation covers removing an old fixture entirely and setting a new one in its place, whether you are matching an existing style or upgrading during a remodel.
Alamo, NV homes with harder water tend to see mineral buildup inside faucet cartridges faster than average, which shows up as reduced flow or a faucet that becomes stiff to turn. Older homes throughout the area also commonly have original fixtures reaching the point where a cartridge replacement no longer fully solves the drip, making a new faucet the more practical option.
Why You Need It / Risks of Ignoring It
A dripping faucet seems minor, but a steady drip adds up to a measurable amount of wasted water and a noticeably higher bill over the course of a year. Mineral staining around the drain and base of the fixture also becomes harder to remove the longer it is left untreated.
A slow leak at the base or under the sink connection can quietly damage cabinetry or countertop material long before it becomes visible on the surface, and a failing cartridge or valve left unaddressed sometimes progresses into a harder leak that requires emergency attention. Outdated or corroded fixtures also affect how a kitchen or bathroom presents, which matters if you are preparing a home for resale.
How We Do It / Our Process
Diagnose the Fixture
We identify whether the issue is a worn cartridge, a failed O-ring, a corroded valve seat, a clogged aerator, or a fixture that has reached the point where replacement makes more sense than repair.
Shut Off & Protect
Water supply to the fixture is shut off and surrounding countertops or cabinetry are protected before any disassembly begins.
Repair or Full Installation
Worn internal parts are replaced for a repair, or for a new install, the old faucet is removed and the new one is set, sealed, and connected to the supply lines with proper fittings.
Leak & Pressure Test
Water is turned back on and run through the fixture at full pressure to confirm there is no leaking at any connection and that flow feels correct.
Final Finish Check
We confirm the faucet is level, secure, and free of fingerprints or residue before considering the installation area complete.
What to Expect
Most faucet repairs are finished in a single visit lasting under an hour, and a full faucet installation typically takes closer to two hours depending on the fixture and existing plumbing connections. If you are replacing your faucet, having the new fixture selected and ready before we arrive keeps the appointment moving efficiently.
Our technician confirms proper fit, seals every connection to prevent future leaks, and tests both hot and cold sides before finishing the job. For installations, we also walk you through any special features your new faucet has, such as a pull-down sprayer or touch activation, so you know how everything works.
Why Choose Us for Faucet Work
Frequently Asked Questions
Related Services
Need Faucet Repair or Installation in Alamo, NV
Stop losing water to a drip or living with a fixture that has seen better days. Get it fixed or replaced with a clean, precise install.
Call 1 (888) 451-9358